ADVANCED FSHD-COM: New Clinical Outcome Measures to Evaluate Non-ambulant FSHD Patients, a Pilot Study

Within MFM-32, 32 terms will be evaluated to describe patient's motor functions and grouped into 3 sub-scores at baseline, 6, 12 and 24 months:

D1: standing position and transfer D2: axial and proximal motor function D3: distal motor function The MFM-32 ratings rely on the use of a 4-point Likert scale based on the subject's maximal abilities without assistance (0: cannot initiate the task or maintain the starting position; 1: performs the task partially; 2: performs the task incompletely or imperfectly; 3: performs the task fully and normally.)

The Manual Muscle Testing is a modified Medical Research Council 13-point and is used with standardized positions for each grade and each muscle following the recommendations of the FSH-DY Group. Shoulder abduction and flexion, elbow flexion and extension, wrist flexion and extension, fingers flexion and extension, hip flexion and abd/adduction, knee flexion and extension, ankle plantarflexion and dorsiflexion strength will be measured bilaterally

Hand-Held dynamometry (HHD) assess the isometric muscle strength in both the upper and lower limbs bilaterally (global shoulder abduction and flexion, elbow flexion and extension, hip abduction, knee extension, ankle dorsiflexion isometric strength). The required equipment is a calibrated hand-held dynamometer (MicroFet). The patient has to push against the hand-held dynamometer 3 times as hard as he can for 3-5 seconds. The maximal value will be kept for further analysis.

The purpose of those tests is to measure the maximum isometric strength of the hand and forearm muscles when doing a grasping or a pinching action. The equipment required for the grip and the pinch tests is a calibrate dynamometer. The subject should be strongly encouraged to give a maximum effort. We record three trials for each hand, alternating hands with at least 30 seconds recovery between each effort. We keep the best result.

The 9-Hole Peg Test is used to measure finger dexterity. The patient is seated at a table with a small, shallow container holding 9 pegs and a wood or plastic block containing nine empty holes. When a stopwatch is started, the patient picks up the 9 pegs one at a time as quickly as possible, puts them in the 9 holes, and, once they are in the holes, removes them again as quickly as possible one at a time, replacing them into the shallow container. The total time to put the pegs and to remove them (one lap) will be recorded, 3 times alternating hands. The best trial will be registered for both hands.

The repeated 9-Hole Peg test (r9-HPT) est a fatigability test. The same procedure like 9-HPT is repeated 5 times (5 laps) with the same hand. The total time to complete the r9-HPT is recorded and the ratio "last lap/first lap" is calculated. The patient will choose the tested hand.

Balance and mobility in patients able to walk at most 30 meters will be assessed using the classic Timed Up and Go test (TUG). The classic TUG measures, in seconds, the time taken by a patient to stand up from a standard armchair (approximate seat height of 46 cm, arm height 65 cm), walk 3 meters, turn, walk back to the chair, and sit down. The best performance will be recorded.

The optimized TUG test measures, in seconds, the time taken by patient to sit up from a lying down position (1st time interval); stand up from the mat (approximate height of 46 cm, walk 3 meters, turn, walk back to the mat, sit down (2nd time interval); and lie down to return to starting position (3rd time interval).

The SiUT measures, in seconds, the time taken by a patient to sit up from a lying down position and to return to the initial position.

The r-SiUT measures, in seconds, the time taken by a patient to sit up from a lying down position and to return to the initial position (1 lap). This task is repeated 5 times (5 laps). The total time to complete the trial is recorded and the ratio last lap/first lap is calculated.

The SaUT measures, in seconds, the time taken by a patient to stand up from a standard armchair (approximate seat height of 46 cm, arm height 65 cm) and to return to the initial position.

The r-SaUT measures, in seconds, the time taken by a patient to stand up from a standard armchair (approximate seat height of 46 cm, arm height 65 cm) and to return to the initial position. This task is repeated 5 times (5 laps). The total time to complete the trial is recorded and the ratio last lap/first lap is calculated.

The NFFT measures, in seconds, the total time that the patient can hold the following position: in a lying position, arm relaxed on each sides of the body, the patient has to raise his head from the table flexing his neck at 45°.

The BOT measures, in seconds, the time taken by the patient, to bend forward, knee in extension, to touch a support placed in front of the middle of the tibia and to return to the initial position.

The r-BOT measures, in seconds, the time taken by the patient, to perform 5 times consecutively the following task: to bend forward, knee in extension, to touch a support placed in front of the middle of the tibia and to return to the initial position.

Muscle mass is assessed with a portable device that quantify muscle volume and reconstruct the profile of muscle cross-sectional area along the thigh or leg. The device consists in a multifrequency bioelectrical impedance analyser, a pair of current electrodes, and a matrix of voltage electrodes positioned on the anterior thigh. Impedance will be measured on each thigh and each arm one after the other.

Sitting and bedside spirometry allow to obtain forced vital capacity and forced respiratory volume in 1 second, two standardized outcomes commonly used to evaluate respiratory function in clinical follow up and clinical trials.

The original SWAL-QOL scale has 44 items exploring patient's quality of life and grouped into 10 lifestyle scales: burden of eating difficulty; eating duration; eating desire; food selection; communication; fear; mental health; social impact; fatigue; and sleep. There is also a symptom-frequency scale in which each item is scored from 1 to 5 (1 for poorest, 5 for best quality of life). For each scale, a separate score out of 100% is calculated, with each item having the same importance. There is no global score of QOL.

The Sydney Swallow Questionnaire (SSQ) is a 17 question, self-report inventory, which was developed to measure symptomatic severity of oral-pharyngeal dysphagia as reported by the affected patient. The questionnaire uses a 100mm long visual analogue scale (VAS) for all but one question.

The FSS is a unidimensional scale which focuses on the physical aspects of fatigue. It is a self-reported questionnaire developed to measure the impact of disabling fatigue on daily functioning. It covers several areas including physical, social, and cognitive effects. The FSS is a patient-reported outcome composed of 9-items with scores ranging from 1 = "strongly disagree" to 7 = "strongly agree".

The PROMIS57 is an instrument developed by the NIH PROMIS initiative. The PROMIS®-57 scales include eight items from seven primary domains: depression, anxiety, physical function, pain interference (and pain intensity), fatigue, sleep disturbance, and satisfaction with social roles. A 5-point scale is used for each instrument, except for the 0-10 pain intensity item.

Raw scores for each of the seven short forms (domains) in PROMIS-57 are calculated, and scores are converted to T-scores for each of the seven short forms (domains) in PROMIS-57 based on the PROMIS guidelines (http://www.healthmeasures.net).

The T-score conversion establishes 50 as a general population mean for all PROMIS domains, and any 10-point deviation corresponds to one standard deviation (SD) difference, for easy-to-understand and consistent scoring across measures.

The Upper Extremity Functional Index 15 (UEFI15) is a validated patient reported measure for adults with upper extremity dysfunction. This index measures upper extremity dysfunction. 20 questions are combined into a total score, the score is transformed into a normalized score with 80 representing normal, and lower scores representing increasing disability.

The Facial Disability Index (FDI) is a short 5 items questionnaire which assesses the physical impact of facial weakness. The five questions are summed into total score which transformed onto a percentage scale, with 100 representing normal, and lower scores representing increasing disability.

The Multidimensional Dyspnea Profile (MDP) is a questionnaire which assesses overall breathing discomfort, sensory qualities, and emotional responses in laboratory and clinical settings. The MDP assesses dyspnea during a specific time or a particular activity (focus period) and is designed to examine individual items that are theoretically aligned with separate mechanisms.

The Speech Handicap Index (SHI) is one of the self-report assessments and questionnaires to assess speech problem and it is a test with 30 items.