Performance of a Single-piece Toric Acrylic Intraocular Lens

Abstract Purpose: To evaluate the visual performance and rotational stability of the Tecnis Toric one-piece IOL (AMO, USA) during the first 3 post-operative months Design: Prospective single center study Setting: VIROS - Vienna Institute for Research in Ocular Surgery, a Karl Landsteiner Institute, Hanusch Hospitel, Vienna, Austria Methods: In this prospective study patients with age-related cataract and corneal astigmatism of 1.0 to 3.0 D measured with the IOL-Master 500 (Carl Zeiss Meditec AG, Germany) were included. Pre-operatively, rotating Scheimpflug scans (Pentacam HR, Oculus, Germany) were performed and the cornea was marked in the sitting position at the slit lamp. Patients recieved a single-piece toric hydrophobic acrylic IOL (Tecnis Toric, AMO, USA). Immediately and 3 months after surgery retroillumination photographs were taken to assess the rotational stability of the IOL. Additionally, Autorefraction (Topcon, USA), subjective refraction, uncorrected and distance corrected visual acuity, keratometry, Scheimpflug and ocular wavefront (WASCA, Carl Zeiss Meditec AG, Germany) measurements were performed at the 3 months follow-up.

Completed

Looking for future studies?

Notify Me

Key information

Conditions

Cataract Astigmatism Corneal Astigmatism Eye Diseases Lens Diseases Refractive Errors

Age range

21 year and older

Sex eligibility

All sexes

Study type

Observational

About this study

Whereas first designs of toric intraocular lenses (toric IOLs) in the early 1990's showed an IOL rotation of more than 30° in one fifth of the patients, modern toric IOLs typically show a mean absolute rotation of 3° to 5°, which would result in a loss of about 10% to 15% of the astigmatism reducing effect of the toric IOL.

Rotational stability of a toric IOL depends on the interaction between the toric IOL and the posterior capsule, whereas misalignment of the toric IOL (defined in this study as the difference between the 3 months postoperatively measured axis of the toric IOL and the intended axis) depends on several factors additionally to rotational stability. Intraoperatively, misalignment may happen due to cyclotorsion of the eye in the lying position or due to peribulbar anaesthesia, and due to imprecision of the surgeon when positioning of the IOL relative to the intended meridian. Both these imprecisions can be dealt with by pre-operative marking of the eye in the sitting position and diligence by the surgeon. Postoperatively, the IOL may rotate because it is undersized for the capsule bag or due to the capsule shrinkage that takes place during fibrotic contraction of the bag in the postoperative period. Since most current IOLs are slightly oversized for the capsule bag, the former is observed rarely and would be more likely in long eyes which tend to have a larger capsule bag diameter. However, capsule bag shrinkage is thought to induce rotation in IOLs with open-loop haptics due to the asymmetry of the haptic design. Typical IOL haptic designs that improve rotational stability are either plate haptic IOLs or special Z-haptic shaped open-loop haptics that attempt to counteract the rotational effect of compression of the shrinking bag. However, both of these IOL designs are thought to have downsides. The former seems to have an increased risk of posterior capsule opacification due to a less effective lens epithelial barrier effect of the optic edge and may also show more rotation in the bag immediately after surgery due to the shorter haptic overall length. The latter IOL design, such as the Z-haptic IOL, is cumbersome to implant and may be prone to damage during implantation.

Aim of this study was to evaluate the rotational stability of a novel single-piece hydrophobic acrylic toric IOL with a C-haptic design.

Who can participate

Healthy volunteers accepted: No

Only the study team can determine whether someone qualifies for participation.

Inclusion criteria

corneal astigmatism between 1.0 D and 3.0 D
cataract

Exclusion criteria

irregular astigmatism
forme fruste Keratoconus
corneal scars
phakodonesis
pseudoexfoliation syndrome
traumatic cataract

Treatment and study plan

Toric Intraocular lens

Device

toric intraocular lens

Other names: Tecnis toric IOL (Abott Medical Optics, USA)

Primary outcomes

Rotational stability of the investigated toric lens

Time frame: 3 months

Rotation of the investigated intraocular lens using a photograph technique (retroillumination images) immediately after surgery and 3 months later.

Secondary outcomes

reduction in post-operative higher order aberrations

Time frame: 3 months

the investigated intraocular lens was proven to reduce some higher order aberrations (this is a refractive problem caused by the cornea). It was shown that the investigated intraocular lens was reducind higher order aberrations in our study population.

Sponsors and collaborators

Lead sponsor

Prim. Prof. Dr. Oliver Findl, MBA

Other

Registry information

Official study title

Rotational Stability of a Single-piece Toric Acrylic Intraocular Lens: a Pilot Study

Important dates

Study start: 2011
Primary completion: 2012
Study completion: 2012
First posted: Jun 4, 2014
Registry last updated: Jun 4, 2014

OpenTrials presents study information sourced from ClinicalTrials.gov. The official registry record should be consulted for the latest information.

View the official ClinicalTrials.gov record (opens in a new tab)

This listing is for discovery and informational purposes only. It is not medical advice, does not guarantee that a study is recruiting, and does not determine eligibility. Contact the study team and a qualified healthcare professional when considering participation.

Published trials that share one or more normalized conditions with this study.

Completed