Mid-face osteotomy
DeviceThe mid-face osteotomy - typically according to LeFort I - is performed using a pulsed erbium-doped yttrium aluminium garnet (Er:YAG) laser driven by the CARLO robot arm.
Other names: Orthognathic Surgery, LeFort I
NCT Number: NCT03901209
The study product is a Cold Ablation Robot-guided Laser Osteotome (CARLO®) robotic surgery device. It is a device that removes hard tissue such as bone by means laser ablation - it is therefore an alternative to Piezo-Electric osteotomes and/or oscillating saws or other mechanical instruments for bone cutting. In this study, the CARLO device is integrated with a computer-assisted pre-operative planning and intra-operative navigation, and will be used for Patients requiring an orthognathic procedure with a mid-face osteotomy, for whom a procedure plan is defined based on preoperative imaging.
Looking for future studies?
Notify Me18 year and older
All sexes
Interventional
Not applicable
Allgemeines Krankenhaus der Stadt Wien (AKH Wien), Vienna, Austria
The objective of this first-in-man study is to confirm the performance and safety of the CARLO® robotic surgery device (manufactured by Advanced Osteotomy Tools SA) for the execution of preoperatively planned midface osteotomies.
The study is designed and powered to confirm, in clinical use across multiple sites, that the CARLO® device can be used to accurately perform straight-line mid-face osteotomies according to preoperative plans, and with results and a safety profile that are comparable to current state-of-the-art osteotomy methods. Multiple risk mitigations are in place to ensure safety, especially for the initially enrolled patients.
A postoperative follow-up of up to 28 days will be included in this study, in order to assess initial soft tissue healing and recovery, and to enable the identification of any soft-tissue injuries that would not have been immediately apparent.
After end of study of each individual patient, safety monitoring will go on for the duration of the study until the last visit of the last patient.
Healthy volunteers accepted: No
Only the study team can determine whether someone qualifies for participation.
Inclusion criteria
[ Indication for performing a mid-face osteotomy using a transoral approach, and suitability for use of CARLO® system: ]
[ General requirements related to enrollment in a clinical study ]
Exclusion criteria
[ General contraindications related to enrollment in a clinical study ]
The mid-face osteotomy - typically according to LeFort I - is performed using a pulsed erbium-doped yttrium aluminium garnet (Er:YAG) laser driven by the CARLO robot arm.
Other names: Orthognathic Surgery, LeFort I
Time frame: Upon completion of the procedure
Successful use of the device through all required steps: initial set-up and self-test, selection of each osteotomy path, previsualization of the path, completion of the osteotomies, and system shut down.
Time frame: Intra-operative observation
Point-pair matching performed to match preoperative imaging with the in-situ patient could be completed with a Root Mean Square error that does not exceed 1.5 mm.
Time frame: Intra-operative observation
The postion of the performed osteotomies is measured intraoperatively, relative to (orthogonally located) landmarks selected on the preoperative 3D model. The oucome is successful if this distance does not exceed 2 mm.
Time frame: Intra-operative observation
The maxillary mobilization (pterygo-maxillary disjunction, pull-down fracture) can be completed as usual. No difficulty is encountered that is unusual for the procedure.
Time frame: Upon completion of the procedure
Variables assessed include:
Time frame: 1 week post-procedure
Overall well-being of the patient allows a normal discharge from the hospital without unusual delay (within one week).
Time frame: 2 weeks post-procedure
During the visit scheduled at 14 days, soft tissue healing allows the removal of stitches as normally possible.
Time frame: 4 weeks post-procedure
During the visit scheduled at 28 days, absence of any anomaly or concern related to post-operative healing.
Time frame: Assessed ~2 weeks postoperatively based on postoperative imaging (CBCT)
Accuracy of the performed cut measured on postoperative CT (distance of the cut start and end relative to the incisor point and to the ipsilateral mesio-buccal cuspid, respectively). Target is to perform cut within 2 mm of the planned position.
Time frame: Assessed ~2 weeks postoperatively based on postoperative imaging (CBCT)
Accuracy of the maxilla relocation, comparing on CT imaging the position of five defined landmarks (e.g. incisor point, tips of the upper canines, tips of the mesio-buccal cuspid) between the plan and the final result.
Advanced Osteotomy Tools (AOT) AG
Industry
OpenTrials presents study information sourced from ClinicalTrials.gov. The official registry record should be consulted for the latest information.
View the official ClinicalTrials.gov record (opens in a new tab)This listing is for discovery and informational purposes only. It is not medical advice, does not guarantee that a study is recruiting, and does not determine eligibility. Contact the study team and a qualified healthcare professional when considering participation.
Published trials that share one or more normalized conditions with this study.
NCT02914431
Abnormalities, Jaw, Congenital Abnormalities
Shanghai, Shanghai Municipality, China
View Trial DetailsNCT07690774
Malocclusion, Malocclusion, Angle Class I
Sanaa, Yemen
View Trial DetailsNCT00099814
Malocclusion, Malocclusion, Angle Class III
Edmonton, Alberta, Canada
View Trial DetailsNCT06244563
Malocclusion, Malocclusion, Angle Class III
Gaziantep, Sehitkamil, Turkey (Türkiye)
View Trial Details