Comparison of Scanning With and Without Rubber Dam for Overlay Restorations

• Introduction: The use of rubber dam in restorative dentistry is important in order to improve the quality of restorations. The incorporation of CAD/CAD systems has led to an increase in the use of chairside techniques. In this work we intend to study in vivo to what extent the optical impressions obtained with rubber dam are equivalent to those taken without rubber dam. For better standardization, overlay restorations are studied.
• Aims: To compare overlay restorations obtained from a scan with rubber dam placed versus restorations of the same type obtained with a scan without rubber dam.
• Material and methods:

(a) Number of patients to be treated: 30. b) Number of visits per patient: 1 c) Brief description of the different techniques used in the study, authorized and validated in the literature (3-5 lines). The use of overlay restorations is widely validated in the literature. In the digital era, rubber dam and non-rubber dam impressions are described in the literature and are used interchangeably. As there is no clinical evidence that both techniques have the same clinical efficacy, we decided to perform this in vivo comparison study.

d) Benefits and harms for the patient of participating in the study (3-5 lines). Participation in the study does not involve any harm to the patient. It is all performed in the same working time, with identical materials and identical clinical technique. It does not bring any particular benefit to the patient. It is explained to the patient that his/her participation contributes to the improvement of scientific knowledge without physical, economic or material cost.

e) Alternative treatment in case the patient does not wish to participate in the clinical study (3-5 lines). The same treatment is given whether the patient participates or not. The patient is informed that an overlay is required, the possible complications of this treatment are explained to him/her, and if he/she accepts, he/she is asked if he/she would object to participate in the study. Participation involves consenting to the analysis of the scans and the final evaluation of the restoration.

f) Treatment to be carried out in the event of complications arising in the patient, once the clinical study has begun (3-5 lines). The clinical study is performed in a single visit and is independent of possible complications of the restoration or the tooth.

g) Material necessary to carry out the study (3-5 lines). Intraoral anesthesia, milling burs, a Primescan intraoral scanner, rubber dam, W8A clamp, two-step adhesive, 5% hydrofluoric acid, silane, clamp holder, dam drill, glycerin are required. No specific material is required for the study with respect to that required for a patient who does not wish to participate in the study.

• Evaluation of experimental and statistical results (3 lines). The sample was calculated by means of G power 3 version 3.1.9 software, 80% power and alpha=0.05. A sample of 30 was determined. The Kappa index will be used to evaluate the concordance between the two evaluators, interpreting the results with the Landis and Koch concordance table. Pearson's test will be used to evaluate the fit, occlusal contacts, interproximal contact points and choice of the best impression.

Inclusion criteria

• Need of an overlay restoration

Exclusion criteria

• No need of overlay restoration