-
Disease Control Rate Assessed by Investigator
Time frame: Imaging (CT or MRI) assessments per RECIST v1.1 will be performed within 28 days prior to the first dose (baseline assessment), every 9 weeks during the first year of the study, and every 12 weeks thereafter. Up to 22 months.
Disease control rate (DCR) is defined as the proportion of participants who achieve complete response (CR), partial response (PR), and stable disease (SD) based on Response Evaluation Criteria In Solid Tumors (RECIST)v1.1. Per Response Evaluation Criteria in Solid Tumors Criteria (RECIST v1 .1) for target lesions and assessed by MRI/ CT: Complete Response (CR), Disappearance of all target lesions; Partial Response (PR), > =30% decrease in the sum of the longest diameter of target lesions. Stable disease(SD) is defined as a tumor that does not meet the criteria for progression or for response.
-
Duration of Response Assessed by Investigator
Time frame: Imaging (CT or MRI) assessments per RECIST v1.1 will be performed within 28 days prior to the first dose (baseline assessment), every 9 weeks during the first year of the study, and every 12 weeks thereafter. Up to 22 months.
Duration of response for responders (CR or PR) is defined as the time interval between the date of the earliest qualifying response and the date of PD or death for any cause (whichever occurs earlier). For subjects who are alive without progression following the qualifying response, duration of response will be censored on the date of last evaluable tumor assessment or last follow-up for progression of disease.
-
Phase Ib: Objective Response Rate (ORR) Assessed by Investigator Based on RECIST Version 1.1
Time frame: Imaging (CT or MRI) assessments per RECIST v1.1 will be performed within 28 days prior to the first dose (baseline assessment), every 9 weeks during the first year of the study, and every 12 weeks thereafter. Up to 22 months.
Per Response Evaluation Criteria in Solid Tumors Criteria (RECIST v1 .1) for target lesions and assessed by MRI/ CT: Complete Response (CR), Disappearance of all target lesions; Partial Response (PR), > =30% decrease in the sum of the longest diameter of target lesions; Objective Response (OR) = CR + PR. Percentage of subjects who achieve objective tumor response (CR or PR) will be summarized.
-
Patients With Anti-CS1001 Antibody
Time frame: Pre-dose of Cycle 1, 2, 4, 5, 7, 10, 13, 16 and every 8 cycles thereafter. Up to 22 months.
-
Overall Survival
Time frame: Subject should be followed from time of registration till the time of subject death. Up to 22 months.
Overall survival is defined as the time interval between the date of the first investigational product dose to the date of death from any cause
-
Disease Control Rate by PD-L1 Protein Level
Time frame: Imaging (CT or MRI) assessments by FGF19 protein and PD-L1 protein level will be performed within 28 days prior to the first dose (baseline assessment), every 9 weeks during the first year of the study, and every 12 weeks thereafter. Up to 22 months.
-
Objective Response Rate (ORR) by PD-L1 Protein Level
Time frame: Imaging (CT or MRI) assessments by FGF19 protein and PD-L1 protein level will be performed within 28 days prior to the first dose (baseline assessment), every 9 weeks during the first year of the study, and every 12 weeks thereafter. Up to 22 months.
-
Progression-free Survival Assessed by Investigator
Time frame: Imaging (CT or MRI) assessments per RECIST v1.1 will be performed within 28 days prior to the first dose (baseline assessment), every 9 weeks during the first year of the study, and every 12 weeks thereafter. Up to 22 months.
Progression-free Survival is defined as the time from the date of first study dose to disease progression or death (whichever occurs first).
-
Time to Progression Assessed by Investigator
Time frame: Imaging (CT or MRI) assessments per RECIST v1.1 will be performed within 28 days prior to the first dose (baseline assessment), every 9 weeks during the first year of the study, and every 12 weeks thereafter. Up to 22 months.
Time to Progression is defined as the time from the date of first study dose to disease progression. Subjects without event (no disease progression) will be censored at the date of "last tumor assessment".
-
Phase II: Safety and Tolerance
Time frame: Safety and tolerance assessments continued for the duration of treatment. AEs and SAEs will be collected from time of signature of main informed consent, throughout the treatment period and including the follow-up period, up to approximate 22 months.
An AE was any untoward medical occurrence after clinical study subjects receive study drug. An SAE was any event that meets any the following criteria: death, life-threatening; inpatient hospitalization or prolongation, persistent or significant disability/incapacity;congenital malformation/birth defects and significant medical events. AE and SAE were graded by CTCAE version 5.0 by severity, from Grade 1 mild to Grade 5 death related AE.
-
Pharmacokinetic Parameters of Accumulation Ratio of Fisogatinib (BLU-554)
Time frame: For BLU554, Cycle 1 day 1( 0, 0.5 to 24 hour post dose) and Cycle 2 day 1( 0, 0.5 to 24 hour post dose).
Pharmacokinetic(PK) parameters of accumulation ratio of Fisogatinib (BLU-554),Rac,AUC. Only participants with evaluable PK results were included in the analysis. Where data is not presented, the PK profiles were non-measurable. Results for Phase Ib and Phase II have been pooled for the same dosage.
-
Pharmacokinetic Parameters of Area Under the Serum Concentration-time Curve (AUC) of Fisogatinib (BLU-554)
Time frame: For BLU554, Cycle 1 day 1( 0, 0.5 to 24 hour post dose) and Cycle 2 day 1( 0, 0.5 to 24 hour post dose).
Pharmacokinetic parameters of area under the serum concentration-time curve (AUC0-τ,ss, Time from 0 to 24h) of Fisogatinib (BLU-554). Only participants with evaluable PK results were included in the analysis. Where data is not presented, the PK profiles were non-measurable. Results for Phase Ib and Phase II have been pooled for the same dosage.
-
Pharmacokinetic Parameters of Clearance at Steady State (CLss) of Fisogatinib (BLU-554)
Time frame: For BLU554, Cycle 1 day 1( 0, 0.5 to 24 hour post dose) and Cycle 2 day 1( 0, 0.5 to 24 hour post dose).
Pharmacokinetic Parameters of Clearance at Steady State (Clss) of Fisogatinib (BLU-554). Only participants with evaluable PK results were included in the analysis. Where data is not presented, the PK profiles were non-measurable. Results for Phase Ib and Phase II have been pooled for the same dosage.
-
Pharmacokinetic Parameters of Maximum Serum Concentration (Cmax) of Fisogatinib (BLU-554)
Time frame: For BLU554, Cycle 1 day 1( 0, 0.5 to 24 hour post dose) and Cycle 2 day 1( 0, 0.5 to 24 hour post dose).
PK Parameters of Cmax of Fisogatinib (BLU-554). Only participants with evaluable PK results were included in the analysis. Where data is not presented, the PK profiles were non-measurable. Results for Phase Ib and Phase II have been pooled for the same dosage.
-
Pharmacokinetic Parameters of Time to Maximum Serum Concentration (Tmax) of Fisogatinib (BLU-554)
Time frame: For BLU554, Cycle 1 day 1( 0, 0.5 to 24 hour post dose) and Cycle 2 day 1( 0, 0.5 to 24 hour post dose).
PK Parameters of Tmax of Fisogatinib (BLU-554). Only participants with evaluable PK results were included in the analysis. Where data is not presented, the PK profiles were non-measurable. Results for Phase Ib and Phase II have been pooled for the same dosage.
-
Pharmacokinetic Parameters of Accumulation Ratio of Sugemalimab (CS1001)
Time frame: For CS1001: Cycle 1 day 1(0, 0.5 to 504 hour post dose) and Cycle 4 day 1 (0, 0.5 to 504 hour post dose).
PK Parameters of Rac, AUC of Sugemalimab (CS1001). Only participants with evaluable PK results were included in the analysis. Where data is not presented, the PK profiles were non-measurable. Results for Phase Ib and Phase II have been pooled for the same dosage.
-
Pharmacokinetic Parameters of Area Under the Serum Concentration-time Curve (AUC ) of Sugemalimab (CS1001)
Time frame: For CS1001: Cycle 1 day 1(0, 0.5 to 504 hour post dose) and Cycle 4 day 1 (0, 0.5 to 504 hour post dose).
PK Parameters of (AUC 0-τ,ss ) of Sugemalimab (CS1001). Only participants with evaluable PK results were included in the analysis. Where data is not presented, the PK profiles were non-measurable. Results for Phase Ib and Phase II have been pooled for the same dosage.
-
Pharmacokinetic Parameters of Clearance at Steady State (CLss) of Sugemalimab (CS1001)
Time frame: For CS1001: Cycle 1 day 1(0, 0.5 to 504 hour post dose) and Cycle 4 day 1 (0, 0.5 to 504 hour post dose).
PK Parameters of CLss of Sugemalimab (CS1001). Only participants with evaluable PK results were included in the analysis. Where data is not presented, the PK profiles were non-measurable. Results for Phase Ib and Phase II have been pooled for the same dosage.
-
Pharmacokinetic Parameters of Maximum Serum Concentration (Cmax) of Sugemalimab (CS1001)
Time frame: For CS1001: Cycle 1 day 1(0, 0.5 to 504 hour post dose) and Cycle 4 day 1 (0, 0.5 to 504 hour post dose).
PK Parameters of Cmax of Sugemalimab (CS1001). Only participants with evaluable PK results were included in the analysis. Where data is not presented, the PK profiles were non-measurable. Results for Phase Ib and Phase II have been pooled for the same dosage.
-
Pharmacokinetic Parameters of Time to Maximum Serum Concentration (Tmax) of Sugemalimab (CS1001)
Time frame: For CS1001: Cycle 1 day 1(0, 0.5 to 504 hour post dose) and Cycle 4 day 1 (0, 0.5 to 504 hour post dose).
PK Parameters of Tmax of Sugemalimab (CS1001). Only participants with evaluable PK results were included in the analysis. Where data is not presented, the PK profiles were non-measurable. Results for Phase Ib and Phase II have been pooled for the same dosage.