Whey Protein Supplementation Associated With Resistance Training on Health Indicators in Trained Older Women

Whole-body dual-energy X-ray absorptiometry (DXA) (Lunar Prodigy) was used to assess lean mass and fat mass and its segments. The total skeletal muscle mass (SMM) was estimated by the predictive equation proposed by Kim et al. (Kim et al., 2004). The results are presented in kg.

Spectral bioelectrical impedance device (Xitron Hydra, model 4200, San Diego, CA, USA) was used to estimate the resistance (R), and reactance (Xc), and subsequently the phase angle (PhA) was calculated as arc-tangent (Xc/R) x 180°/π. The results are presented in degree

Spectral bioelectrical impedance device (Xitron Hydra, model 4200, Xitron Technologies, San Diego, CA, USA) was used to estimate the intracellular water (ICW), extracellular water (ECW), and total body water (TBW). The results are presented in liters (L)

Measurements of serum levels of high-sensitivity CRP were carried out using a biochemical auto-analyzer system (Dimension Max - Siemens Dade Behring) according to established methods in the literature consistent with the manufacturer's recommendations. The results are presented in milligrams per decilitre (mg/dL).

Tumor Necrosis Factor -α (TNF-α) and Interleukin-6 (IL-6) were determined by enzyme-linked immunosorbent assay (ELISA), according to the specifications of the manufacturer (Quantikine High Sensitivity Kit, Minneapolis) and performed in a microplate reader Perkin Elmer, model EnSpire (Waltham, MA, USA). All samples were determined in duplicate to guarantee the precision of the results. The results are presented in picograms per milliliter (pg/ml).

The CAT analysis is by measuring the decay in concentration of hydrogen peroxide

, and oxygen generation using the technique described by literature. The reading of the CAT reaction was carried out in a spectrophotometer, ThermoSpectronic® brand, model HELIOS-α (Waltham, MA, USA) at a wavelength of 240 nm.

The SOD activity in erythrocytes was determined using the pyrogallol method described by literature. The reading of SOD reaction is performed in a spectrophotometer, thermoSpectronic® brand, model HELIOS-α (Waltham, MA, USA) at a wavelength of 420 nm.

For measurements, advanced oxidation protein products (AOPP) were determined in the plasma using a semiautomatic method. AOPP concentrations were expressed as micromoles per liter (μmol/L). Total plasma antioxidant capacity (TRAP) was determined by the chemiluminescence method for the induction time of 2.2 azo-bis (2-amidinopropane) and calibrated with Trolox analogue of vitamin E. TRAP values were expressed in μmol of Trolox.

Measurements of serum levels of total cholesterol (TC), high-density lipoprotein (HDL-C) and triglycerides (TG) were determined using a biochemical auto-analyzer system (Dimension Max - Siemens Dade Behring) according to established methods in the literature consistent with the manufacturer's recommendations. For the determination of LDL-c was used the Friedewald equation: LDL-c=TC - (HDL-c + TG / 5). The Castelli Index I was calculated by dividing the total cholesterol concentration (TC) by the concentration of HDL-c (CT / HDL-c), while the Castelli Index II was determined from concentration of LDL-c divided by the concentration of HDL-c (LDL-c / HDL-c)

Measurements of serum levels of glucose (GLU) were determined using a biochemical auto-analyzer system (Dimension Max - Siemens Dade Behring).Insulin was determined by the chemiluminescence method (LIASON equipment) and the Homeostasis Assessment Model (HOMA-IR) was calculated by the formula: Insulin fasting (μUI / mL) x Glucose fasting (mmol / L) / 22.5.

Maximal dynamic strength was evaluated using the 1RM test assessed on chest press, knee extension, and preacher curl exercises performed in this exact order. Testing for each exercise was preceded by a warm-up set (6-10 repetitions), with approximately 50% of the estimated load used in the first attempt of the 1RM. This warm-up was also used to familiarize the subjects with the testing equipment and lifting technique. The testing procedure was initiated 2 minutes after the warm-up. The subjects were instructed to try to accomplish two repetitions with the imposed load in three attempts in both exercises. The rest period was 3 to 5 min between each attempt, and 5 min between exercises. The 1RM was recorded as the last resistance lifted in which the subject was able to complete only one single maximal execution

Body mass was measured to the nearest 0.1 kg using a calibrated electronic scale scale (Balmak), with subjects wearing light workout clothing and no shoes. Height was measured using a stadiometer to the nearest 0.1 cm while subjects were standing without shoes. Body mass index was calculated as the body mass in kilograms divided by the square of the height in meters. We also collected data on waist circumference (WC) and (HC) hip, using a flexible and inelastic tape measure. WC was obtained at the midpoint between the last rib and the iliac crest at the time of expiration and the WC was measured in the region of greater perimeter between the waist and the thigh. Two measurements were used to measure each circumference. In situations in which the difference between the measurements was greater than 0.5 cm a third measurement was performed, with the value of the median being adopted as reference. All measurements were performed by the same evaluator.

Resting BP assessment was performed using automatic, oscillometric equipment (Omron - 7113). Participants attended the laboratory on three different days and, during each visit, remained seated at rest for 10 min with the cuff of the equipment in place on the right arm. Subsequently, several BP measurements were performed at one-minute intervals in order to obtain three consecutive measurements where the difference in systolic BP (SBP) and diastolic BP (DBP) readings differed by no more than 4 mmHg. The average of the three measurements for each day was averaged across the three visits.

Food consumption were assessed by the 24-hour dietary recall method applied on two non-consecutive days of the week, with the aid of a photographic record taken during an interview. The homemade measurements of the nutritional values of food and supplementation were converted into grams and milliliters by the online software Virtual Nutri Plus (Keeple®, Rio de Janeiro, Rio de Janeiro, Brazil) for diet analysis. Some foods were not found in the program database and therefore items were added from food tables.