GSK1325756H
DrugDanirixin will be available as 10 and 50 milligram (mg) white film coated, round and oval tablets intended for oral administration. It will be administered with 240 mL of water.
NCT Number: NCT03136380
Danirixin is a selective chemokine receptor antagonist being developed as a potential anti-inflammatory agent for the treatment of chronic obstructive pulmonary disease (COPD). The aim of the study is to assess the safety, tolerability and pharmacokinetics (PK) in healthy Japanese subjects over the age of 65 years (inclusive). The study will be conducted in two parts: Part 1 will be a double blind, placebo-controlled, 3-period crossover, ascending single oral dose administration of GSK1325756H (Hydrobromide Salt Tablet Formulations of Danirixin) 10, 50 and 100 milligram (mg) in the fed condition. Part 2 will be an open label, 2-period crossover, single oral dose of GSK1325756H 50 mg in fed and fasted state. This study will provide an understanding of PK of hydrobromide salt of GSK1325756 in population of healthy elderly subjects and also contribute to the selection of appropriate dosing for Phase IIa study in Japan.
Looking for future studies?
Notify Me65 year and older
Male
Interventional
Phase 1
GSK Investigational Site, Tokyo, Japan
Healthy volunteers accepted: Yes
Only the study team can determine whether someone qualifies for participation.
Inclusion criteria
Exclusion criteria
Danirixin will be available as 10 and 50 milligram (mg) white film coated, round and oval tablets intended for oral administration. It will be administered with 240 mL of water.
Subjects will receive visually matching danirixin placebo tablets. It will be administered with 240 mL of water.
Time frame: Up to 32 days in Part 1
AE is any untoward medical occurrence in a participant or clinical investigation participant, temporally associated with the use of a medicinal product, whether or not considered related to the medicinal product. An SAE is any untoward medical occurrence that, at any dose results in death, is life-threatening, requires hospitalization or prolongation of existing hospitalization, results in disability/incapacity, or is a congenital anomaly/birth defect or is medically significant. Safety population comprised of all participants who took at least one dose of study treatment.
Time frame: Up to 21 days in Part 2
AE is any untoward medical occurrence in a participant or clinical investigation participant, temporally associated with the use of a medicinal product, whether or not considered related to the medicinal product. An SAE is any untoward medical occurrence that, at any dose results in death, is life-threatening, requires hospitalization or prolongation of existing hospitalization, results in disability/incapacity, or is a congenital anomaly/birth defect or is medically significant
Time frame: Baseline and up to 72 hours in Part 1
Blood samples were collected for the assessment of chemistry parameters namely calcium, cholesterol, chloride, glucose, HDL cholesterol, potassium, LDL cholesterol, sodium, phosphorus, triglycerides, and urea/BUN results for Part 1. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 72 hours in Part 1
Blood samples were collected for the assessment of chemistry parameters namely alkaline phosphatase, ALT, AST, creatine kinase, GGT and lactate dehydrogenase for Part 1. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 72 hours in Part 1
Blood samples were collected for the assessment of chemistry parameters namely albumin and total protein for Part 1. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 72 hours in Part 1
Blood samples were collected for the assessment of chemistry parameters namely direct bilirubin, total bilirubin, creatinine and uric acid for Part 1. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 72 hours in Part 1
Blood samples were collected for the assessment of chemistry parameters namely amylase for Part 1. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 48 hours in Part 2
Blood samples were collected for the assessment of chemistry parameters namely calcium, cholesterol, chloride, glucose, HDL cholesterol, potassium, LDL cholesterol, sodium, phosphorus, triglycerides, urea/BUN results for Part 2. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value.
Time frame: Baseline and up to 48 hours in Part 2
Blood samples were collected for the assessment of chemistry parameters namely alkaline phosphatase, ALT, AST, creatine kinase, GGT and lactate dehydrogenase for Part 2. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value.
Time frame: Baseline and up to 48 hours in Part 2
Blood samples were collected for the assessment of chemistry parameters namely albumin and total protein for Part 2. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value.
Time frame: Baseline and up to 48 hours in Part 2
Blood samples were collected for the assessment of chemistry parameters namely direct bilirubin, total bilirubin, creatinine and uric acid for Part 2. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value.
Time frame: Baseline and up to 48 hours in Part 2
Blood samples were collected for the assessment of chemistry parameter namely amylase for Part 1. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value.
Time frame: Baseline and up to 72 hours in Part 1
Blood samples were collected for the assessment of hematology parameters namely basophils, eosinophils, leukocytes, lymphocytes, monocytes, total neutrophils and platelets for Part 1. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 72 hours in Part 1
Blood samples were collected for the assessment of hematology parameter namely hemoglobin for Part 1. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 72 hours in Part 1
Blood samples were collected for the assessment of hematology parameter namely hematocrit for Part 1. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 72 hours in Part 1
Blood samples were collected for the assessment of hematology parameter namely mean corpuscle hemoglobin for Part 1. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 72 hours in Part 1
Blood samples were collected for the assessment of hematology parameter namely mean corpuscle volume for Part 1. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 72 hours in Part 1
Blood samples were collected for the assessment of hematology parameters namely platelet count and white blood cell count for Part 1. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 72 hours in Part 1
Blood samples were collected for the assessment of hematology parameters namely red blood count and reticulocyte count for Part 1. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 48 hours in Part 2
Blood samples were collected for the assessment of hematology parameters namely basophils, eosinophils, leukocytes, lymphocytes, monocytes, total neutrophils and platelets for Part 2. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value.
Time frame: Baseline and up to 48 hours in Part 2
Blood samples were collected for the assessment of hematology parameter namely hemoglobin for Part 2. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value.
Time frame: Baseline and up to 48 hours in Part 2
Blood samples were collected for the assessment of hematology parameter namely hematocrit for Part 2. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value.
Time frame: Baseline and up to 48 hours in Part 2
Blood samples were collected for the assessment of hematology parameter namely mean corpuscle hemoglobin for Part 2. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value.
Time frame: Baseline and up to 48 hours in Part 2
Blood samples were collected for the assessment of hematology parameter namely mean corpuscle volume for Part 2. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value.
Time frame: Baseline and up to 48 hours in Part 2
Blood samples were collected for the assessment of hematology parameters namely platelet count and white blood cell count for Part 2. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value.
Time frame: Baseline and up to 48 hours in Part 2
Blood samples were collected for the assessment of hematology parameters namely red blood count and reticulocyte count for Part 2. Baseline was defined as assessments performed on Day -1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value.
Time frame: Up to 72 hours in Part 1
Urinalysis parameters assessed were urine bilirubin, urine occult blood, urine glucose, urine ketones, urine protein and urine urobilinogen. In this dipstick test, the level of bilirubin, occult blood, glucose, ketones, urine protein and urobilinogen in urine samples was recorded as negative, trace and +. Urine samples were collected for the measurement of urinalysis parameters by dipstick method up to 72 hours in Part 1. Only categories with significant values have been presented.
Time frame: Up to 72 hours in Part 1
Urinary pH measurement is a routine part of urinalysis. Urine pH is an acid-base measurement. pH is measured on a numeric scale ranging from 0 to 14; values on the scale refer to the degree of alkalinity or acidity. A pH of 7 is neutral. A pH less than 7 is acidic, and a pH greater than 7 is basic. Normal urine has a slightly acid pH (5.0 - 6.0). Urine samples were collected for the measurement of urine pH by method up to 72 hours in Part 1. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Up to 72 hours in Part 1
Urinary specific gravity measurement is a routine part of urinalysis. Urine specific gravity is a measure of the concentration of solutes in the urine and provides information on the kidney's ability to concentrate urine. The concentration of the excreted molecules determines the urine's specific gravity. Urine samples were collected for the measurement of urine specific gravity by dipstick method up to 72 hours in Part 1. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles). Density is the mass per unit volume and has units (such as g/cm^3), however, the specific gravity is a ratio so it has no unit.
Time frame: Up to 48 hours in Part 2
Urinalysis parameters assessed were urine bilirubin, urine occult blood, urine glucose, urine ketones, urine protein and urine urobilinogen. In this dipstick test, the level of bilirubin, occult blood, glucose, ketones, urine protein and urobilinogen in urine samples was recorded as negative, trace and +. Urine samples were collected for the measurement of urinalysis parameters by dipstick method up to 48 hours in Part 2. Only categories with significant values have been presented.
Time frame: Up to 48 hours in Part 2
Urinary pH measurement is a routine part of urinalysis. Urine pH is an acid-base measurement. pH is measured on a numeric scale ranging from 0 to 14; values on the scale refer to the degree of alkalinity or acidity. A pH of 7 is neutral. A pH less than 7 is acidic, and a pH greater than 7 is basic. Normal urine has a slightly acid pH (5.0 - 6.0). Urine samples were collected for the measurement of urine pH by dipstick method up to 48 hours in Part 2.
Time frame: Up to 72 hours in Part 2
Urinary specific gravity measurement is a routine part of urinalysis. Urine specific gravity is a measure of the concentration of solutes in the urine and provides information on the kidney's ability to concentrate urine. The concentration of the excreted molecules determines the urine's specific gravity. Urine samples were collected for the measurement of urine specific gravity by dipstick method up to 48 hours in Part 2. Density is the mass per unit volume and has units (such as g/cm^3), however, the specific gravity is a ratio so it has no unit.
Time frame: Baseline and up to 72 hours in Part 1
Vital sign measurements included SBP and DBP at Baseline and up to 72 hours in Part 1. SBP and DBP measurements were preceded by at least 5 minutes of rest for the participant in a quiet setting without distractions and were measured in a supine position after 5 minutes rest. Baseline was defined as pre-dose assessments performed on Day 1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 72 hours in Part 1
Vital sign measurements included heart rate at Baseline and up to 72 hours in Part 1. Heart rate measurements were preceded by at least 5 minutes of rest for the participant in a quiet setting without distractions and were measured in a supine position after 5 minutes rest. Baseline was defined as pre-dose assessments performed on Day 1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 72 hours in Part 1
Vital sign measurements included temperature at Baseline and up to 72 hours in Part 1. Temperature measurements were preceded by at least 5 minutes of rest for the participant in a quiet setting without distractions and were measured in a supine position after 5 minutes rest. Baseline was defined as pre-dose assessments performed on Day 1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 48 hours in Part 2
Vital sign measurements included SBP and DBP at Baseline and up to 72 hours in Part 2. SBP and DBP measurements were preceded by at least 5 minutes of rest for the participant in a quiet setting without distractions and were measured in a supine position after 5 minutes rest. Baseline was defined as pre-dose assessments performed on Day 1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value.
Time frame: Baseline and up to 48 hours in Part 2
Vital sign measurements included heart rate at Baseline and up to 72 hours in Part 2. Heart rate measurements were preceded by at least 5 minutes of rest for the participant in a quiet setting without distractions and were measured in a supine position after 5 minutes rest. Baseline was defined as pre-dose assessments performed on Day 1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value.
Time frame: Baseline and up to 48 hours in Part 2
Vital sign measurements included temperature at Baseline and up to 72 hours in Part 2. Temperature measurements were preceded by at least 5 minutes of rest for the participant in a quiet setting without distractions and were measured in a supine position after 5 minutes rest. Baseline was defined as pre-dose assessments performed on Day 1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value.
Time frame: Baseline and up to 72 hours in Part 1
Single 12-lead ECG's were obtained from Baseline and up to 72 hours in Part 1 using an ECG machine that automatically calculated the heart rate and measured PR Interval, QRS Duration, Uncorrected QT interval and Corrected QT (Fridericia's correction) interval. Baseline was defined as pre-dose assessments performed on Day 1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value. Only those participants with data available at the specified time were analyzed (represented by n=x in the category titles).
Time frame: Baseline and up to 48 hours in Part 2
Single 12-lead ECG's were obtained from Baseline and up to 72 hours in Part 2 using an ECG machine that automatically calculated the heart rate and measured PR Interval, QRS Duration, Uncorrected QT interval and Corrected QT (Frederica's correction) interval. Baseline was defined as pre-dose assessments performed on Day 1. Change from Baseline was calculated by subtracting the post-dose-visit value from the Baseline value.
Time frame: Pre-dose and at 0.25, 0.5, 0.75, 1, 2, 3, 4, 6, 8, 10, 12, 24, 48 hours in all 3 periods; 60 and 72 hours post-dose in period-3 of Part 1
Whole blood samples of approximately 1 milliliters were collected for measurement of blood concentrations of GSK1325756 at pre-dose and at 0.25, 0.5, 0.75, 1, 2, 3, 4, 6, 8, 10, 12, 24, 48 hours in all 3 periods; 60 and 72 hours post-dose in period-3 of part 1. Data has been presented for blood concentrations of GSK1325756 in fed state. Pharmacokinetic (PK) population was defined as participants who were administered at least one dose of study treatment and who had PK sample taken and analyzed. NA indicates standard deviation could not be calculated due to high proportion of non-quantifiable [NQ] values (more than 30% of values were imputed i.e., NQ assigned zero concentration) which affected the standard deviation and no sample was obtained per protocol for 60 and 72 hours.
Time frame: Pre-dose and at 0.25, 0.5, 0.75, 1, 2, 3, 4, 6, 8, 10, 12, 24, 48 hours post-dose in Part 2
Whole blood samples of approximately 1 milliliters were collected for measurement of blood concentrations of GSK1325756 at Pre-dose and at 0.25, 0.5, 0.75, 1, 2, 3, 4, 6, 8, 10, 12, 24, 48 hours post-dose in part 1. Data has been presented for blood concentrations of GSK1325756 in fasted and fed state. NA indicates standard deviation could not be calculated due to high proportion of NQ values (more than 30% of values were imputed i.e., NQ assigned zero concentration) which affected the standard deviation.
Time frame: Pre-dose and at 0.25, 0.5, 0.75, 1, 2, 3, 4, 6, 8, 10, 12, 24, 48 hours in all 3 periods; 60 and 72 hours post-dose in period-3 of Part 1
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of GSK1325756H in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose and at 0.25, 0.5, 0.75, 1, 2, 3, 4, 6, 8, 10, 12, 24, 48 hours in all 3 periods; 60 and 72 hours post-dose in period-3 of Part 1
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of GSK1325756H in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose and at 0.25, 0.5, 0.75, 1, 2, 3, 4, 6, 8, 10, 12, 24, 48 hours in all 3 periods; 60 and 72 hours post-dose in period-3 of Part 1
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of GSK1325756H in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose and at 0.25, 0.5, 0.75, 1, 2, 3, 4, 6, 8, 10, 12, 24, 48 hours in all 3 periods; 60 and 72 hours post-dose in period-3 of Part 1
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of GSK1325756H in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose and at 0.25, 0.5, 0.75, 1, 2, 3, 4, 6, 8, 10, 12, 24, 48 hours in all 3 periods; 60 and 72 hours post-dose in period-3 of Part 1
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of GSK1325756H in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose and at 0.25, 0.5, 0.75, 1, 2, 3, 4, 6, 8, 10, 12, 24, 48 hours in all 3 periods; 60 and 72 hours post-dose in period-3 of Part 1
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of GSK1325756 in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose and at 0.25, 0.5, 0.75, 1, 2, 3, 4, 6, 8, 10, 12, 24, 48 hours in all 3 periods; 60 and 72 hours post-dose in period-3 of Part 1
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of GSK1325756 in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose and at 0.25, 0.5, 0.75, 1, 2, 3, 4, 6, 8, 10, 12, 24, 48 hours in all 3 periods; 60 and 72 hours post-dose in period-3 of Part 1
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of GSK1325756H in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose and at 0.25, 0.5, 0.75, 1, 2, 3, 4, 6, 8, 10, 12, 24, 48 hours post-dose in Part 2
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of GSK1325756H in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose and at 0.25, 0.5, 0.75, 1, 2, 3, 4, 6, 8, 10, 12, 24, 48 hours post-dose in Part 2
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of GSK1325756H in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose and at 0.25, 0.5, 0.75, 1, 2, 3, 4, 6, 8, 10, 12, 24, 48 hours post-dose in Part 2
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of GSK1325756H in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times. Only those participants with data available at the indicated time points were analyzed.
Time frame: Pre-dose and at 0.25, 0.5, 0.75, 1, 2, 3, 4, 6, 8, 10, 12, 24, 48 hours post-dose in Part 2
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of GSK1325756H in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose and at 0.25, 0.5, 0.75, 1, 2, 3, 4, 6, 8, 10, 12, 24, 48 hours post-dose in Part 2
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of GSK1325756H in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose and at 0.25, 0.5, 0.75, 1, 2, 3, 4, 6, 8, 10, 12, 24, 48 hours post-dose in Part 2
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of GSK1325756H in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times. Only those participants with data available at the indicated time points were analyzed.
Time frame: Pre-dose and at 0.25, 0.5, 0.75, 1, 2, 3, 4, 6, 8, 10, 12, 24, 48 hours post-dose in Part 2
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of GSK1325756H in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
Time frame: Pre-dose and at 0.25, 0.5, 0.75, 1, 2, 3, 4, 6, 8, 10, 12, 24, 48 post-dose in Part 2
Blood samples were collected at the indicated time points after administration of study treatment to investigate the PK profile of GSK1325756H in fasted state. PK parameters were calculated by standard non-compartmental analysis using Phoenix WinNonlin Version 6.4 or higher based on actual sampling times.
GlaxoSmithKline
Industry
A Single Centre, Double Blind (Sponsor Open), Placebo Controlled, 3-Period Crossover, Ascending Dose Study in Japanese Healthy Elderly Male Subjects to Evaluate the Safety, Tolerability and Pharmacokinetics of Danirixin in the Fed State (Part1) and an Open Label, 2-way Crossover to Evaluate Food Effect on the Pharmacokinetics of Danirixin (Part2)
OpenTrials presents study information sourced from ClinicalTrials.gov. The official registry record should be consulted for the latest information.
View the official ClinicalTrials.gov record (opens in a new tab)This listing is for discovery and informational purposes only. It is not medical advice, does not guarantee that a study is recruiting, and does not determine eligibility. Contact the study team and a qualified healthcare professional when considering participation.
Published trials that share one or more normalized conditions with this study.
NCT07252908
Chronic Disease, Disease Attributes
Chongqing, Chognqing, China
View Trial DetailsNCT07649577
Asthma, Bronchial Diseases
Amman, Jordan
View Trial DetailsNCT06979518
Chronic Disease, Disease Attributes
Cypress, California, United States
View Trial DetailsNCT06367686
Apnea, Chronic Disease
Tønsberg, Norway
View Trial Details