Eating Window and Sleep Disorders on Glycemic Control, Cardiovascular Risk, and Weight Loss

Weight (kg) will be estimated using the Tanita Tetrapolar Bioimpedance Scale with Octaelectrodes BC 601®. Before the consultation, participants will be instructed to attend the meeting wearing light clothing, avoiding heavy meals, fasting from water for 1 hour, and from caffeine for 24 hours prior to the exam. For the measurements, participants will be asked to remove their shoes and empty their bladder. Subsequently, the individual will be asked to step onto the scale. Data will be collected in the morning to mitigate any type of recurring body water fluctuation throughout the day.

Analyzed the expression of the gene that works in partnership with CLOCK to activate circadian cycle-related genes during the study.

Analyzed the expression of the gene encoding a key circadian regulatory protein (CLOCK) during the study.

Analyzed the expression of the gene encoding a key circadian regulatory protein (CRY1) during the study.

Analyzed the expression of the gene encoding a key circadian regulatory protein (PER1) during the study.

ABPM will be performed with 24-hour monitoring at five study points to assess circadian blood pressure. Data will include daytime/nighttime averages, dipping patterns, variability, and follow-up changes

Medications will be recorded during the nutritional consultation using the anthropometric and clinical evaluation protocols, aiming to mitigate any bias during the intervention.

The presence or absence of physical exercises was evaluated through conventional qualitative measurement/the survey of the presence or absence of active or sedentary individuals. Patients with levels equal to or greater than 5 trainings sessions per week, with a total duration of 250 min/week, were classified as "active (>5 sessions)/moderate (=5 sessions)". Patients with levels equal to 3 trainings sessions per week, with a total duration of 150 min/week, were classified as "light". Individuals below this recommendation (<3 sessions or zero) were considered to be "sedentary".

These are statistical corrections of hip circumference, respectively, normalized for height and weight, providing more accurate information regarding the participant's body composition and cardiovascular risk. HI = HC (cm) ∗ Weight (kg) - 0.482 ∗ Height (cm) 0.31

Neck (cm) circumferences will be measured using the 2.0m Sanny® Anthropometric Tape Measure. Neck circumference will be measured by placing the tape around the neck. The ideal neck circumference is up to 37 cm for men and up to 34 cm for women. Measurements below 39.5 cm for men and 36.5 cm for women are considered to indicate a low risk of heart disease or circulatory disorders.

Hip circumference will be measured with the 2.0m Sanny® measure using the widest point of the hip or the midpoint of the buttocks

HDL cholesterol will be measured using the Roche cobas c501® equipment. The adequate levels of HDL cholesterol should be higher than 40 mg/dL of blood.

triglycerides (TG) will be measured using the Roche cobas c501® equipment. As for the values of the triglycerides, values below 130 mg/dL are desired.

glucose will be analyzed using Siemens® equipment. For the diagnosis of diabetes, two fasting blood glucose measurements ≥ 126 mg/dL after a minimum of 8 hours of fasting or glycated hemoglobin ≥ 6.5% are considered

body fat percentage (%) will be estimated using the Tanita Tetrapolar Bioimpedance Scale with Octaelectrodes BC 601®. Before the consultation, participants will be instructed to attend the meeting wearing light clothing, avoiding heavy meals, fasting from water for 1 hour, and from caffeine for 24 hours prior to the exam. For the measurements, participants will be asked to remove their shoes and empty their bladder. Subsequently, the individual will be asked to step onto the scale. Data will be collected in the morning to mitigate any type of recurring body water fluctuation throughout the day.

lean mass (kg) will be estimated using the Tanita Tetrapolar Bioimpedance Scale with Octaelectrodes BC 601®. Before the consultation, participants will be instructed to attend the meeting wearing light clothing, avoiding heavy meals, fasting from water for 1 hour, and from caffeine for 24 hours prior to the exam. For the measurements, participants will be asked to remove their shoes and empty their bladder. Subsequently, the individual will be asked to step onto the scale. Data will be collected in the morning to mitigate any type of recurring body water fluctuation throughout the day.

Sociodemographic assessment: Provides general data such as age, sex, socioeconomic level, race, profession, and others. To classify social classes, the following classifications will be considered: Class A (more than 20 minimum wages); Class B (10 to 20 minimum wages); Class C (four to 10 minimum wages); Class D (two to four minimum wages); and Class E (up to two minimum wages)

Dietary assessment (habitual food recall): Analyzes the participant's usual intake, allowing for a thorough evaluation in both quantitative and qualitative aspects, and secondarily in performing calculations/estimates, as well as detecting possible deficiencies/excesses

The habit of skipping breakfast will be assessed using the metric "yes" or "no." All data mentioned in this session will be evaluated every three months over the 30 months.

The Pittsburgh Sleep Quality Index (PSQI) is an instrument developed at the University of Pittsburgh, used to identify sleep problems and disorders. It consists of 19 items grouped into seven main components related to sleep:

Subjective sleep quality: Assesses overall satisfaction with sleep quality.

Sleep latency: Refers to the time required to fall asleep after going to bed.

Sleep duration: Measures the total amount of sleep during the night.

Sleep efficiency: Calculates the proportion of time spent in bed to the total time of sleep.

Sleep disturbances: Investigates the frequency of problems such as apnea, gasping, and nightmares.

Use of sleep medication: Identifies the use of substances, such as sleeping pills, to aid sleep.

Daytime dysfunction: Assesses the impact of sleep on daily functionality, including energy levels and fatigue.

Participants respond to each item based on their experience over the past 30 days, using a scale of 0 to 3.

Blood pressure (BP) values will be measured using the Omron Digital Control® equipment, after five to ten minutes of rest, with three readings on the right arm (RA) and left arm (LA), with a one-minute interval between measurements. For participants with BP values >160/90 mmHg, a five-minute rest period will be conducted before another measurement is taken. For participants with BP values >200/100 mmHg, where the equipment is unable to measure the pressure, the conventional measurement method using the Nylon Premium Black® sphygmomanometer and Solidor CX® Double Black Stethoscope will be used. Individuals with SBP ≥ 140 mmHg and DBP ≥ 90 mmHg will be considered hypertensive [5,6]. Blood pressure and heart rate data will be evaluated every three months over a 30-month period.

The calculation of allometric indices will be performed: Body Shape Index (ABSI). These are statistical corrections of waist and hip circumference, respectively, normalized for height and weight, providing more accurate information regarding the participant's body composition and cardiovascular risk. ABSI=WC/BMI2/3×height1/2.

The waist/hip ratio will also be calculated by dividing the waist circumference (cm) by the hip circumference (cm). Hip circumference will be measured by placing the tape around the widest part of the hip and the midpoint of the buttocks. Desired values are < 0.85 for women and < 0.9 for men, indicating low cardiovascular risk. Values above these limits are classified as high risk for cardiovascular diseases.

Waist (cm) circumference will be measured using the 2.0m Sanny® Anthropometric Tape Measure. Waist circumference will be measured by placing the tape around the midpoint between the last rib and the hip bone. This point will be marked in advance with a specific pen for anthropometry. Desired waist circumference values are below 80 cm for women and 94 cm for men, indicating "low cardiovascular risk." Values of 80 to 87 cm for women and 94 to 101 cm for men indicate "high cardiovascular risk." Values above 88 cm for women and 102 cm for men indicate "very high cardiovascular risk."

BMI will be calculated using the formula weight (kg) divided by height squared (m)², with the following categories: Underweight < 18.5 kg/m²; Normal weight 18.5 - 24.9 kg/m²; Overweight 25.0 - 29.9 kg/m²; Obesity class 1 30.0 - 34.9 kg/m²; Obesity class 2 35.0 - 39.9 kg/m²; Obesity class 3 ≥ 40 kg/m². For participants > 60 years old, the classification is: Underweight ≤ 22 kg/m²; Normal weight > 22.0 < 27.0 kg/m²; Obesity ≥ 27.0 kg/m²

Height (meters) will be measured using the Welmy® stadiometer. The participant will be instructed to position themselves with their back against the stadiometer rod, in an upright posture (looking at the horizon and with the chest expanded).

LDL cholesterol will be estimated using the Friedewald Equation ([LDL] = (TC - HDL) - (TG/5)). When triglyceride levels are above 400 mg/dL, LDL cholesterol will be calculated using the Roche cobas c501® equipment with Sekisu® reagents [5,6]. Adequate levels of LDL cholesterol in healthy individuals should be below 130 mg/dL of blood, and for those at risk, levels should not exceed 70 mg/dL.

Total cholesterol (TC) will be measured using the Roche cobas c501® equipment. The values of total cholesterol considered to be normal should be below 190 mg/dL, slightly high when they are between 200 and 239 mg/dL, and high when they are above 240 mg/dL.

HbA1c will be analyzed using Siemens® equipment. For the diagnosis of diabetes, two fasting blood glucose measurements ≥ 126 mg/dL after a minimum of 8 hours of fasting or glycated hemoglobin ≥ 6.5% are considered

Serum insulin levels will be measured using Siemens® immunoassay equipment. Insulin concentration is a key biomarker for evaluating pancreatic β-cell function and insulin resistance. Reference values: fasting insulin in adults typically ranges from 5-15 µU/mL, with slightly broader ranges observed in children and adolescents (2-25 µU/mL). Elevated fasting insulin levels, in combination with glucose measurements, may indicate impaired glucose metabolism and increased risk for type 2 diabetes.

Creatinine clearance will be assessed using 24-hour urine collection and serum creatinine levels, calculated to estimate glomerular filtration rate (GFR). This measure provides an important indicator of renal function and metabolic health. Reference values: adult males (<40 years) typically show 107-139 mL/min, while adult females (<40 years) show 87-107 mL/min. Clearance values decline physiologically by approximately 6.5 mL/min per decade of life. Normal 24-hour urine creatinine excretion ranges from 500-2000 mg/day. Reduced clearance values are associated with impaired kidney function and increased cardiovascular risk.

Polysomnography is the gold-standard examination for objective sleep assessment. In the clinical trial, the following parameters will be collected with their respective measurement units: Electroencephalogram (EEG), brain electrical activity recorded in microvolts (µV) to determine sleep stages; Electro-oculogram (EOG), eye movements in microvolts (µV) used to identify REM sleep; Electromyogram (EMG), muscle activity in microvolts (µV) typically from the chin and limbs; Electrocardiogram (ECG), heart rate in beats per minute (bpm); Nasal and oral airflow, measured in liters per minute (L/min); Thoracic and abdominal movements, respiratory effort in centimeters of displacement (cm) or relative sensor units; Pulse oximetry, peripheral oxygen saturation in percentage (%SpO₂); Apnea-Hypopnea Index (AHI), number of events per hour of sleep (events/h); Total Sleep Time (TST), minutes (min); Sleep latency, minutes (min); Sleep efficiency, percentage (%) calculated as TST/total time in bed ×