Skip to main content
OpenTrials
Completed

NCT Number: NCT04922086

Digital Planning and Guided Dual Technique in Aesthetic Crown Lengthening

Excessive gingival exposure, commonly named gingival smile, results in a dentogingival disharmony. One of the gingival smile treatment is the aesthetics-related crown lengthening surgery (ACL) to provide a adequate clinical crown length and diminish gingival display. In this context, digital planning and guided dual technique have been proposed to increase the effectiveness and predictability of the ACL. In this technique, an facial and dental analysis of the patient is performed and transferred to a digital model obtained by intraoral digital scan. The digital model is used to create a double guide that will determine the final position of the gingival and alveolar margin in the ACL. Despite the technique showing promising results, clinical studies evaluating the effectiveness of this technique are scarce. The present study aims to evaluate the digital planning and guided dual technique in the ACL in comparison to conventional technique in relation to the predictability/stability of the gingival margin positioning and patient satisfaction after the ACL. Twenty-four patients diagnosed with altered passive eruption type I subcategory B will be selected and divided into two groups. In the control group (n = 12) patients will be submitted to the conventional ACL planned using clinical examination; in the test group (n = 12) patients will be submitted to ACL using cone beam computed tomography (CBCT), digital planning and guided dual technique. Periodontal clinical parameters including probing depth (PS), clinical attachment level (CAL), clinical crown length (CCL), anatomical crown length (ACL) and cemento-enamel junction to alveolar bone crest distance will be evaluated clinically at baseline, in the immediate postoperative, 4, 8 and 12 months after the procedure. Participants will be submitted to questionnaires to assess satisfaction with the smile, gum and tooth characteristics and experience with the procedure. The investigators aim to demonstrate with the study the effectiveness of the both techniques and evaluate the clinical cost benefit for the patient and the dentist of the guided dual technique in relation to the conventional ACL technique.

Completed

Looking for future studies?

Notify Me

Key information

Age range

18 year–50 year

Sex eligibility

All sexes

Study type

Interventional

Phase

Not applicable

Primary location

Universidade Federal de Alfenas

Alfenas, Minas Gerais, 37130-013, Brazil

Who can participate

Healthy volunteers accepted: Yes

Only the study team can determine whether someone qualifies for participation.

Inclusion criteria

  • Non smokers;
  • Periodontal and systemically healthy;
  • Patients with more than 20 teeth including the six maxillary anterior teeth;
  • Altered passive eruption diagnosis (classified as type I subcategory B) in the quadratic anterior teeth.

Exclusion criteria

  • Orthodontic treatment;
  • Presence of prosthetic crowns;
  • Extensive restorations;
  • Extensive incisal edge attrition;
  • Misalignment on maxillary anterior teeth.

Treatment and study plan

Conventional aesthetic crown lengthening surgery

Procedure

The demarcation of the gingival zenith final position will be done on the teeth using a periodontal probe. This demarcation will be done through visual examination based on the crown length/width ratio and the position of the cemento-enamel junction (CEJ). The gingival margin of the central and canine incisors will be positioned at similar heights and a more coronal gingival contour will be determined for the lateral incisors. An internal bevel incision will be made with a blade on each tooth, preserving the interdental papillae. The incised gingival tissue will be removed using a periodontal curette in both groups. An internal bevel incision will be made in the involved teeth and a full thickness flap will be displaced up to the the mucogingival junction level to expose the bone crest (BC). Carbide drills and manual chisels will be used for bone resection to obtained a CEJ-BC distance of 3 mm. Simple interproximal interrupted sutures will be performed.

Guided dual aesthetic crown lengthening surgery

Procedure

The double guide will be positioned and an internal bevel incision on each tooth will be made following the guide demarcation. After the initial incision, the incised gingival tissue will be removed using a periodontal curette. An internal bevel incision will be made in the involved teeth and a full thickness flap will be displaced up to the the mucogingival junction level to expose the bone crest (BC). The dual guide will be positioned again and the bone tissue will be removed using carbide drills and manual chisels following the double guide. No interproximal crestal bone will be removed. Simple interproximal interrupted sutures will be performed to stabilize the flap.

Primary outcomes

  1. Change of clinical crown length.

    Time frame: Baseline, immediately after the intervention, 4, 8 and 12 months.

    Measured as the distance between incisal edge and gingival marginal using a periodontal probe and its will determine the stability of the gingival margin in the both groups. The clinical crown length will be also measured using a cone beam computed tomography (CBCT)

Secondary outcomes

  1. Change of gingival display.

    Time frame: Baseline, 4, 8 and 12 months.

    Measured as the distance between central incisor gingival margin during active smile and the inferior border of the upper lip vermilion using a periodontal probe.

  2. Change of gingival width.

    Time frame: Baseline, immediately after the intervention, 4, 8 and 12 months.

    Measured as the distance between mucogingival junction and gingival margin, using the visual method.

  3. Change of gingival margin position.

    Time frame: Baseline, 4, 8 and 12 months.

    Measured as the cemento-enamel junction to gingival margin distance using a periodontal probe.

  4. Change of gingival thickness.

    Time frame: Baseline.

    Measured at the 3mm apical of gingival margin with a endodontics file inserted perpendicular to the surface until firm resistance was met, and recorded to the nearest millimetre using a digital caliber. The gingival thickness will be also measured using a cone beam computed tomography (CBCT).

  5. Change of anatomic crown length.

    Time frame: During the intervention.

    Measured after flap elevation as the distance between incisal edge and cemento-enamel junction, along the long axis of the tooth using a periodontal probe and cone beam computed tomography (CBCT).

  6. Distance between cemento-enamel junction and bone crest.

    Time frame: During the intervention.

    Measured of the distance between cemento-enamel junction and bone crest using a periodontal probe and cone beam computed tomography (CBCT).

  7. Change of probing depth.

    Time frame: Baseline, 4, 8 and 12 months.

    Measured as the distance between gingival margin and bottom of the gingival sulcus using a periodontal probe.

  8. Change of clinical attachment level

    Time frame: Baseline, 4, 8 and 12 months.

    Measured as the distance between cemento-enamel junction and bottom of the sulcus using a periodontal probe.

Sponsors and collaborators

Lead sponsor

Universidade Federal de Alfenas

Other

Registry information

Official study title

The Effectiveness of Digital Planning and Guided Dual Technique in Aesthetic Crown Lengthening: A Randomized Controlled Clinical Trial

Important dates

Study start
2019
Primary completion
2021
Study completion
2021
First posted
Jun 10, 2021
Registry last updated
May 10, 2024

OpenTrials presents study information sourced from ClinicalTrials.gov. The official registry record should be consulted for the latest information.

View the official ClinicalTrials.gov record (opens in a new tab)

This listing is for discovery and informational purposes only. It is not medical advice, does not guarantee that a study is recruiting, and does not determine eligibility. Contact the study team and a qualified healthcare professional when considering participation.

Published trials that share one or more normalized conditions with this study.