Celtra Quatro Crown Study

A recently introduced high strength, zirconia-reinforced lithium silicate (ZLS) ceramic material for full contour CAD/CAM crowns is reported to offer a more translucent and esthetic high strength crown in a more efficient oven firing process. Celtra Quatro (Dentsply Sirona) is submitted to a high temperature matrix firing cycle in the SpeedFire oven (Dentsply Sirona) to achieve high strength in less than 5 minutes following milling. It has a reported flexural strength of 650 MPa compared to 450 MPa for lithium disilicate glass ceramic and > 900 MPa for 3mol% full contour zirconia.

Most glass ceramic materials have a recommended material thickness of 1.5 mm to maximize the strength potential of the material. Occlusal reduction resulting in a crown thickness of 1.0 mm, equitable to the recommendation for full contour zirconia crowns, may be considered sufficient to maintain the desired high strength attained by the ZLS material. This would also result in a more conservative tooth preparation.

Another potential advantage of high strength ZLS crowns to many clinicians is that they may be inherently strong enough to allow for conventional cementation. However, for less retentive preparations, it may also be possible to adhesively bond the crowns through the use of adhesive resin cements.

It is the intent of this investigation to evaluate the clinical application and performance of the new high strength, zirconia-reinforced lithium silicate material (Celtra Quatro) for CAD/CAM-generated chair-side crown applications. Patients will be recruited to have 60 Celtra Quatro crowns prepared and delivered during a single dental appointment using a chairside CAD/CAM system (CEREC/Dentsply Sirona). The crowns will be recalled at 6 months and then yearly for 5 years to evaluate long-term outcomes of the crowns.

Inclusion criteria

• must have at least one carious lesion or defective restoration or fractured tooth in a molar or premolar
• reason for restoration should extend more than one-half the intercuspal width of the tooth requiring a full crown restoration
• Teeth to be vital and asymptomatic prior to treatment
• No more than two restorations will be placed per patient. If a patient presents with more than two acceptable teeth for the study, molar teeth will be included prior to premolar teeth.

Exclusion criteria

• Devital or sensitive teeth
• Teeth with prior endodontic treatment of any kind
• Teeth with a history of direct or indirect pulp capping procedures
• Patients with significant untreated dental disease to include periodontitis and rampant caries
• Pregnant or lactating women
• Patients with a history of allergies to any of the materials to be used in the study
• Patients unable to return for the recall appointments