Skip to main content
OpenTrials
Completed

NCT Number: NCT05804487

ABL90 FLEX PLUS Clinical Precision Study for 15 Parameters in Adult Whole Blood

Conducting the ABL90 FLEX PLUS Clinical Precision Study for 15 Parameters in Adult Whole Blood is to validate performance claims for precision in heparinized whole blood for 15 parameters: pH, pCO2, pO2, cCa2+, cCl-, cK+, cNa+, cGlu, cLac, ctHb, sO2, FO2Hb, FMetHb, FCOHb, and FHHb, while being influenced by testing environment that is representative of intended use environment, site variability, and operator variability in a point-of-care (POC) setting.

The investigational device is the ABL90 FLEX PLUS (Figure 1) incl. consumables, running SW3.5 MR2, manufactured by Radiometer Medical ApS The study is being conducted in Denmark and in total, a minimum of 105 subjects are to be enrolled to provide successful measurement values from 3 different sites.

Completed

Looking for future studies?

Notify Me

Key information

Conditions

Age range

18 year and older

Sex eligibility

All sexes

Study type

Observational

Primary location

Tejs Jansen

Copenhagen, Østerbro, 2100, Denmark

About this study

The conduct of the clinical study is to determine repeatability of each parameter using replicate measurements from heparinized whole blood samples measured by intended users in syringe, short probe, and capillary modes available for ABL90 FLEX PLUS, in a POC setting.

The study endpoint is repeatability (SD) in whole blood for each parameter, measuring mode and parameter level, pooled across sites. Participating sites are intensive care wards, and the adult patients (≥18 years old ) are admitted to the hospital with low (moderate hypo), normal, or elevated (moderate hyper) concentrations of the 15 parameters covering the reportable range as much as possible. For collecting whole blood samples, the subject is required to have either arterial or Central Venus Catheter (CVK) lines established as part of standard of care to minimize the risk to the patient.

Each sample of 1.5 mL whole blood is used to complete 2 replicates per run (Each sample will be measured twice on the selected mode during 1 run). Samples to be measured in syringe mode are measured from a syringe, or samples to be measured in capillary mode are transferred to capillary tubes from a syringe and measured from a capillary tube.

Part 1:

  • Samples collected from 20 subjects (patients).
  • 6 samples of whole blood are collected from each subject (3 samples for Run 1 and 3 samples for Run 2).
  • Minimum 40 whole blood samples to be measured in S65 syringe mode (20 subjects x 2 samples per subject).
  • Minimum 40 whole blood samples to be measured in SP65 short-probe mode (20 subjects x 2 samples per subject).
  • Minimum 40 whole blood samples to be measured in C65 capillary mode (20 subjects x 2 samples per subject).
  • Minimum 120 whole blood samples to be measured in all 3 modes free of errors. If errors occur, a new sample needs to be collected.

Part 2:

  • Samples collected from 15 subjects (patients or donate blood).
  • 9 samples of whole blood are collected from each subject. (3 samples in S65 mode, 3 samples in SP65 mode, 3 samples transferred into 6 capillary tubes in C65 mode).
  • Minimum 45 whole blood samples to be measured in S65 syringe mode (15 subjects x 3 samples per subject).
  • Minimum 45 whole blood samples to be measured in SP65 short-probe mode (15 subjects x 3 samples per subject).
  • Minimum 45 whole blood samples to be measured in C65 capillary (15 subjects x 3 samples per subject).
  • Minimum 135 whole blood samples to be measured in all 3 modes free of errors. If errors occur, a new sample needs to be collected.

Minimum 255 (heparinized) whole blood samples obtained from adult patients or donate blood are required for this study from each site.

This study will evaluate 2-3 levels per parameter covering the moderate hypo, normal and moderate hyper range.

Three POC users, such as a nurse, a physician, or a therapist perform the measurements in an equal range.

Samples are collected to measure the pH, pCO2, pO2, cCa2+, cCl-, cK+, cNa+, cGlu, cLac, ctHb, sO2, FO2Hb, FMetHb, FCOHb, and FHHb parameters in heparinized whole blood. Samples are destroyed when measurements are completed.

The ABL90 FLEX PLUS analyzer is a portable, automated analyzer that measures pH, blood gases, electrolytes, metabolites, and oximetry in whole blood - utilizing 3 measuring modes (syringe, short probe, and capillary mode) to measure samples from a syringe, test tube or a capillary tube. The analyzer provides results for 17 parameters in 35 seconds using 65 μL heparinized whole blood.

Who can participate

Healthy volunteers accepted: Yes

Only the study team can determine whether someone qualifies for participation.

Inclusion criteria

  • Subject must be 18 years of age or older.
  • Obtained informed consent from subject or from relative(s) able to understand information given and willing and able to voluntary give their consent to participate in this study.
  • Subject shall have an arterial or a CVK line established as a part of the standard care.
  • Subject evaluated as suitable according to the protocol and for the study by the principal investigator or designee.

Exclusion criteria

  • Subjects where sample collection is evaluated by principal investigator or designee to impose an unnecessary risk.
  • Subjects, who are pregnant or breastfeeding.
  • Subjects who have been previously enrolled into this study.
  • Subjects taking medications listed in Appendix 1 within 72 hours of the sample collection
  • Subjects with known infectious disease such as Hepatitis C or HIV (to ensure the operator safety)

Treatment and study plan

ABL90 FLEX PLUS analyser running SW3.5 MR2.

Device

The ABL90 FLEX PLUS analyzer is a portable, automated analyzer that measures pH, blood gases, electrolytes, metabolites, and oximetry in whole blood - utilizing 3 measuring modes (syringe, short probe, and capillary mode) to measure samples from a syringe, test tube or a capillary tube. The analyzer provides results for 17 parameters in 35 seconds using 65 μL heparinized whole blood.

Primary outcomes

  1. Repeatability (SD) in whole blood for each parameter, measuring mode and parameter level, pooled across sites.

    Time frame: 4 - 6 hours

    Repeatability of each parameter (pH, pCO2, pO2, cCa2+, cCl-, cK+, cNa+, cGlu, cLac, ctHb, sO2, FO2Hb, FMetHb, FCOHb and FHHb) using replicate measurements from heparinized whole blood samples measured by intended users in syringe, short probe, and capillary modes available for ABL90 FLEX PLUS, in a POC setting.

Sponsors and collaborators

Lead sponsor

Radiometer Medical ApS

Industry

Registry information

Important dates

Study start
2023
Primary completion
2023
Study completion
2023
First posted
Apr 7, 2023
Registry last updated
Sep 15, 2023

OpenTrials presents study information sourced from ClinicalTrials.gov. The official registry record should be consulted for the latest information.

View the official ClinicalTrials.gov record (opens in a new tab)

This listing is for discovery and informational purposes only. It is not medical advice, does not guarantee that a study is recruiting, and does not determine eligibility. Contact the study team and a qualified healthcare professional when considering participation.

Published trials that share one or more normalized conditions with this study.