PRA Health Sciences
Groningen, NZ 9728, Netherlands
NCT Number: NCT03649997
The purpose of this 3 part study are; Part 1: to investigate the pharmacokinetic (PK), safety and tolerability of JNJ-61393215 suspension (ascending dose levels) after single oral dose administration under fasted conditions, Part 2: to evaluate the relative bioavailability of a solid JNJ-61393215 capsule formulation compared to a suspension of JNJ-61393215 under fasted conditions, and the effect of food on the PK of the solid JNJ-61393215 capsule formulation, Part 3: to investigate the PK, safety, and tolerability of JNJ-61393215 suspension (ascending dose levels) after 7 days of once daily dosing in under fasted conditions.
Looking for future studies?
Notify Me18 year–55 year
All sexes
Interventional
Phase 1
Groningen, NZ 9728, Netherlands
Healthy volunteers accepted: Yes
Only the study team can determine whether someone qualifies for participation.
Inclusion criteria
Exclusion criteria
Participants will be administered JNJ-61393215 in Part 1, 2 and 3 of study as oral suspension.
Participants will be administered JNJ-61393215-matching placebo in Part 1, 2 and 3 of study as oral suspension.
Time frame: Predose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 12, 16, 24, 36 and 48 hours postdose
Cmax is defined as the maximum observed analyte concentration.
Time frame: Predose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 12, 16, 24, 36 and 48 hours postdose
Tmax is defined as actual sampling time to reach maximum observed analyte concentration.
Time frame: Predose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 12, 16, 24, 36 and 48 hours postdose
AUC(0-last) is defined as the area under the analyte concentration-time curve from time 0 to the time of the last measurable (non-below quantification level [non-BQL]) analyte concentration calculated by linear-linear trapezoidal summation.
Time frame: Predose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 12, 16, 24, 36 and 48 hours postdose
AUC (0-infinity) is defined as the area under the analyte concentration vs. time curve from time 0 to infinite time, calculated as AUC(0-last) + Clast/lambda(z), where Clast is the last observed measurable (non-BQL) analyte concentration.
Time frame: Predose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 12, 16, 24, 36 and 48 hours postdose
lambda(z) is estimated by linear regression using the terminal logarithmic (log)-linear phase of the log transformed concentration vs time data.
Time frame: Predose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 12, 16, 24, 36 and 48 hours postdose
T1/2 is defined as the apparent terminal elimination half-life and is calculated as 0.693/lambda(z).
Time frame: Predose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 12, 16, 24, 36 and 48 hours postdose
Clearance of a drug is a measure of the rate at which a drug is metabolized or eliminated by normal biological processes. Clearance obtained after oral dose (apparent oral clearance) is influenced by the fraction of the dose absorbed. Drug clearance is a quantitative measure of the rate at which a drug substance is removed from the blood.
Time frame: Predose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 12, 16, 24, 36 and 48 hours postdose
Volume of distribution is defined as the theoretical volume in which the total amount of drug would need to be uniformly distributed to produce the desired analyte concentration of a drug. Apparent volume of distribution after subcutaneous dose (Vz/F) is influenced by the fraction absorbed.
Time frame: Up to 7 Weeks
An adverse event is any untoward medical event that occurs in a participant administered an investigational product, and it does not necessarily indicate only events with clear causal relationship with the relevant investigational product.
Time frame: Predose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 12, 16, 24, 36, 48 and 72 hours postdose
Cmax is defined as the maximum observed analyte concentration.
Time frame: Predose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 12, 16, 24, 36, 48 and 72 hours postdose
AUC(0-last) is defined as the area under the analyte concentration-time curve from time 0 to the time of the last measurable (non-below quantification level [non-BQL]) analyte concentration calculated by linear-linear trapezoidal summation.
Time frame: Predose, 0.5, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 12, 16, 24, 36, 48 and 72 hours postdose
AUC(0-infinity) is defined as the area under the analyte concentration vs. time curve from time 0 to infinite time, calculated as AUC(0-last) + Clast/lambda(z), where Clast is the last observed measurable (non-BQL) analyte concentration.
Time frame: Predose, 20, 40 minutes, 1, 1.5, 2, 2.5, 3, 4, 6 and 12 hours postdose on Day 1 and Day 7; 24 and 48 hours postdose on Day 7
Cmax is defined as the maximum observed analyte concentration.
Time frame: Predose, 20 and 40 minutes, 1, 1.5, 2, 2.5, 3, 4, 6, 8 and 12 hours postdose on Day 1 and Day 7, 24 and 48 hours postdose on Day 7
Tmax is defined as actual sampling time to reach maximum observed analyte concentration.
Time frame: Predose, 20 and 40 minutes, 1, 1.5, 2, 2.5, 3, 4, 6, 8 and 12 hours postdose on Day 1 and Day 7, 24 hours postdose on Day 7
Area under the analyte concentration vs time curve from time 0 to 24 hours, calculated by linear-linear trapezoidal summation.
Time frame: Predose on day 1, 2, 3, 4, 5, 6, 7 and 20 and 40 minutes, 1, 1.5, 2, 2.5, 3, 4, 6, 12, 24 and 48 hours postdose on Day 7
Ctrough is defined as the observed analyte concentration just prior to the beginning or at the end of a dosing interval. Ctrough estimation does not include the concentration that occurs just prior to the first dose.
Time frame: Predose, 20 and 40 minutes, 1, 1.5, 2, 2.5, 3, 4, 6, 12, 24 and 48 hours postdose on Day 7
Cmin is defined as the minimum observed analyte concentration during the dosing interval.
Time frame: Predose, 20 and 40 minutes, 1, 1.5, 2, 2.5, 3, 4, 6, 12, 24 and 48 hours postdose on Day 7
Cavg is defined as the value of the average analyte concentration at steady state over the dosing interval.
Time frame: Predose, 20 and 40 minutes, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 12, 24 and 48 hours postdose on Day 7
FI is estimated as the percentage fluctuation (variation) between the maximum and minimum analyte concentration at steady state.
Time frame: Predose, 20 and 40 minutes, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 12, 24 and 48 hours postdose on Day 7
Volume of distribution is defined as the theoretical volume in which the total amount of drug would need to be uniformly distributed to produce the desired blood concentration of a drug. Steady state volume of distribution (Vss) is the apparent volume of distribution at steady-state which is estimated by (D/AUC[0-infinity])*(AUMC[0-infinity])/AUC[0-infinity]) where D is the dose of study drug, AUMC(0-infinity) is the area under the first moment curve extrapolated to infinity and AUC(0-infinity) is the area under the analyte concentration-time curve from time zero to infinite time.
Time frame: Predose, 20 and 40 minutes, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 12, 24 and 48 hours postdose on Day 7
Clearance of a drug is a measure of the rate at which a drug is metabolized or eliminated by normal biological processes. Clearance obtained after oral dose (apparent oral clearance) is influenced by the fraction of the dose absorbed. Drug clearance is a quantitative measure of the rate at which a drug substance is removed from the blood.
Time frame: Predose, 20 and 40 minutes, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 12, 24 and 48 hours postdose on Day 7
lambda(z) is estimated by linear regression using the terminal logarithmic (log)-linear phase of the log transformed concentration vs time data.
Time frame: Predose, 20 and 40 minutes, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 12, 24 and 48 hours postdose on Day 7
T1/2 is defined as the apparent terminal elimination half-life and is calculated as 0.693/lambda(z).
Time frame: Predose, 20 and 40 minutes, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 12, 24 and 48 hours postdose on Day 7
Peak by trough ratio is defined as the ratio of the maximum observed analyte concentration to the minimum observed analyte concentration.
Time frame: Predose, 20 and 40 minutes, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 12, 24 hours postdose on Day 1 and 7
AR AUC is determined after multiple-dose administration and calculated as AUC (0-24h) on day 7 divided by AUC (0-24h) on day 1.
Time frame: Predose, 20 and 40 minutes, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 12, 24 hours postdose on Day 1 and 7
ARCmax is determined after multiple-dose administration and calculated as Cmax on day 7 divided by Cmax on day 1.
Time frame: Up to 8 Weeks
An adverse event is any untoward medical event that occurs in a participant administered an investigational product, and it does not necessarily indicate only events with clear causal relationship with the relevant investigational product.
Janssen Research & Development, LLC
Industry
A Multi-cohort, Randomized Study in Healthy Subjects to Assess the Pharmacokinetics and Safety of Single and Multiple Ascending Doses of JNJ-61393215 (Suspension), and to Assess the Relative Bioavailability, and the Effect of Food on the Pharmacokinetics, of a New Solid Formulation (Capsules) of JNJ-61393215
OpenTrials presents study information sourced from ClinicalTrials.gov. The official registry record should be consulted for the latest information.
View the official ClinicalTrials.gov record (opens in a new tab)This listing is for discovery and informational purposes only. It is not medical advice, does not guarantee that a study is recruiting, and does not determine eligibility. Contact the study team and a qualified healthcare professional when considering participation.
Published trials that share one or more normalized conditions with this study.
NCT06068257
Breast Cancer, Breast Diseases
Orlando, Florida, United States
View Trial DetailsNCT06702423
Healthy
London, United Kingdom
View Trial DetailsNCT07223164
Healthy
Irvine, California, United States
View Trial DetailsNCT05595902
Healthy
Kadıköy, Istanbul, Turkey (Türkiye)
View Trial Details